How to Install August Doorbell Cam Pro Mounting Wedge

By August Home | Smart Locks for Convenient, Keyless Entry | Published: 2026-10-18

Category: How-to Guides

Step-by-step guide to installing the August Doorbell Cam Pro Mounting Wedge. Learn how to angle your doorbell camera for a better field of view and avoid common mistakes.

Quick Answer

To install the August Doorbell Cam Pro Mounting Wedge, first remove your existing doorbell, attach the wedge to the wall with the provided screws, then mount the doorbell camera onto the wedge. The wedge angles the camera so you can adjust the field of view without repositioning the entire unit.

What You Need Before Starting

Before you begin, gather a screwdriver (typically Phillips-head), the August Doorbell Cam Pro Mounting Wedge, and the mounting screws included in the package. The wedge is designed specifically for the August Doorbell Cam Pro, so make sure you have the correct model. If you are replacing an existing wired doorbell, you will also need a voltage tester to ensure the wires are safe to handle.

Installation Steps

Step 1: Turn Off Power and Remove Existing Doorbell: Switch off the circuit breaker that powers your doorbell. Remove the screws holding your current doorbell to the wall, then gently pull it away to expose the wires. Use a voltage tester to confirm the wires are dead before proceeding. Common mistake: Forgetting to turn off power can lead to electric shock. Always test with a voltage tester.
Step 2: Attach the Mounting Wedge to the Wall: Position the wedge on the wall where you want the camera to angle. Use the included screws to secure the wedge firmly. The wedge has pre-drilled holes that align with standard doorbell wiring holes. Checkpoint: Ensure the wedge is level and the angle points toward the area you want to monitor. A crooked wedge will misalign the camera.
Step 3: Connect the Wires and Mount the Doorbell Cam Pro: Thread the doorbell wires through the center hole of the wedge. Connect the wires to the terminals on the back of the August Doorbell Cam Pro. Then press the doorbell camera onto the wedge until it clicks into place. Secure it with the provided screws if needed. Common mistake: Overtightening the screws can strip the threads or crack the wedge. Tighten until snug, then stop.
Step 4: Restore Power and Test: Turn the circuit breaker back on. Wait for the doorbell camera to power up and connect to your Wi-Fi. Use the August app to check the camera angle and adjust if necessary. If the angle is off, you may need to reposition the wedge. Checkpoint: If the camera view is still not ideal, try rotating the wedge 180 degrees or using a different mounting position.

Product Facts

August Doorbell Cam Pro Mounting Wedge: The August Doorbell Cam Pro Mounting Wedge is a mounting accessory for positioning your August Doorbell Cam Pro at an angle. It is compatible with the August Doorbell Cam Pro and helps position the camera at an angle when mounted. If your doorbell camera's field of view is blocked by a wall or pillar, the wedge lets you tilt the camera to capture a better view without moving the whole doorbell.