Back to Blog
How-to Guides 2026-11-20 August Home | Smart Locks for Convenient, Keyless Entry 0 views

In-Home Chime Power Board Installation Guide

In-Home Chime Power Board Installation Guide

Learn how to install the In-Home Chime Power Board to reduce doorbell chime noise from wired video doorbell cameras. This guide covers compatibility and step-by-step setup.

What the In-Home Chime Power Board Does

Wired video doorbell cameras draw more power than your existing doorbell is designed to supply. This extra power demand can cause a humming noise from your doorbell chime. The In-Home Chime Power Board is a small accessory that reduces that noise, letting your chime ring normally when someone presses the doorbell button and stay quiet the rest of the time.

Compatibility and Product Details

  • In-Home Chime Power Board: Compatible with: August Doorbell Cam, August Doorbell Cam Pro You need one of these specific doorbell models for the power board to work. It is not a universal accessory.
    In-Home Chime Power Board
    In-Home Chime Power Board
  • In-Home Chime Power Board: The power board reduces any noise from your chime except for when you need to hear it ring. The board does not silence the chime entirely; it eliminates the constant hum while preserving the doorbell ring sound.

Installation Steps

The following steps are based on the general process for adding a power board to a wired doorbell system. Always turn off power at the circuit breaker before handling any doorbell wiring.

  1. Turn off power to your doorbell: Locate the correct circuit breaker and switch it off. Confirm power is off by testing the doorbell button.
  2. Remove the doorbell chime cover: Take off the cover of your indoor doorbell chime to access the wiring terminals.
  3. Connect the power board: Attach the In-Home Chime Power Board to the chime terminals according to the manufacturer's instructions. The board typically connects between the transformer and the chime.
  4. Secure the power board inside the chime box: Place the board neatly inside the chime enclosure and replace the cover.
  5. Restore power and test: Turn the circuit breaker back on. Press the doorbell button to confirm the chime rings and that the humming noise is gone.

What the Catalog Does Not Tell You

The supplied product record does not include a wiring diagram or specific wire color codes. If your chime wiring is unfamiliar, consult a licensed electrician. The power board is designed only for wired chimes; wireless or electronic chimes may not be compatible. Also, the board does not boost video doorbell performance—its sole purpose is noise reduction.

Related Articles

Customer Service
Home
Products
Cart
Profile